You have looked online, made various phone calls, and planned ahead. Finally, you found the best possible solution for your cleanroom. But how do you make sure it will last you a long time? Our tip: contribute to the lifespan of your lifting and hoisting equipment by making sure that cleaning runs efficiently.

Every cleanroom has its specific requirements. You can choose from a wide range of solutions and possibilities to meet these standards. Are you looking for a new crane in your cleanroom, or do you want to know if your hoisting and lifting equipment meets the high requirements and wishes? Then read on!

In 2019, the PP4CE alliance did a wonderful job at one of its relations. This is a large international pharmaceutical group for which we were allowed to build a 600 m2 GMP classified cleanroom.

Are you involved in the (re)design of a conditioned environment? And are you exploring your options? We know there are many. To help you achieve the perfect set-up for your cleanroom, we have a tip: don’t forget about the cranes!

Cleaning your cleanroom equipment is very important. It reduces the amount of contamination during work and/or production processes and contributes to the durability of your lifting and hoisting equipment. It is therefore important that cleaning is done efficiently. In this blog, we will share some eye-opening tips.

Every cleanroom has its specific demands. To fulfil these, you can choose from a wide range of solutions and possibilities. There are many different mechanical and electrical lifting and hoisting solutions for conditioned environments.

Mennens and Elma are supplying highly precise cleanroom cranes that will be used in the development of a new generation of silicon chips.

Joint collaboration between Mennens and ELMA in the realization of high precision crane technology

As part of Axel Johnson International’s digitalisation journey, the Lifting Solutions division has initiated a new project is focusing on how Augmented Reality (AR) can help to improve service support

Global Health & Pharma Magazine rewarded PP4CE with the Technology Award 2018.

A conference about the impact of BREXIT to pharma operations

It started out as a small project, a nice little extra, when 20 years ago, chip machine maker ASML asked Mennens for a cle...

As from July, the Mennens Cleanroom Cranes division is moving to a new location in Eindhoven. This new dedicated cleanroom (production) office of...

Mead Johnson Nutrition (MJN) is a well-known producer of baby food (milk powder). At the location in Nijmegen, various raw ...

The General Data Protection Regulation (GDPR) is applied as of May 25 2018. As highly valued partner we want to keep you informed about...

PP4C is since 2014 a strategic alliance between a number of specialists in the field of Controlled Environment technology w...

PP4C is since 2014 a strategic alliance between a number of specialists in the field of Controlled Environment technol...

A new contract is signed between Mennens Cleanroom Cranes BV and Zinter Handling Inc. Zinter is responsible for the sales in the USA of the Mennens Cl...

As from November, Tim Servaes and Koen van der Heyden will lead the dedicated project management and sales team ...

Last week, Danny van Deuzen handed over the certificate Most Valued Member 2016 to Scott Zinter of Zinter Handling. The valuable partner received the ...

With the completion of the new workshop area, Zinter handling increased their production/working area with 8.000 ft2. The total complex measures now 2...

In Taiwan an order of four sets of EUV cranes will be delivered at two different locations in the country. The crane s...

In the US two sets of EUV cranes with 4 x 5.000 kg hoists are now ready for use in the ISO 5 cleanrooms. Together wi...

For a customer in the Czech Republic, we have in the past months finished installing a double girder light weight cr...

To further keep our quality at level and to deliver guarantees in cleanliness for our customers we announce that our updated Belt hoist and double gir...

Our BH is ISO 8 certified by Fraunhofer. You can upgrade your existing belt hoist with stainless steel covers. This upgrade is mainly for pr...

Two 500 kg belt hoist are being prepared for Sicor Biotech, a TEVA company specialized in generic pharmaceuticals. The fixed belt hoist will be placed...

Directly after successful projects for different customers now Cleanroom Cranes is facilitating Global Foundries with 4 sets of cranes each 4 x 5.000 ...

Cleanroom Cranes has extended the product range with various types of INOX products suitable for the food industry. We can supply various kinds of sys...

Again Cleanroom Cranes has managed to successful deliver and install 2 x 2 sets of EUV cranes for two customers. The crane sets with 4 x 5.000 kg hois...

Cleanroom Cranes has finished installing a double girder light weight crane for a 2.000 kg load, with 7 meter crane runway and 6,5 meter bridge span. ...

The double girder gantry crane has been successfully delivered and made operational by our partner in USA. It has 600 kg working load and is fir for ...

G450C is a 450 mm wafer and equipment development program, a collaboration of five leading international companies. The G450C group, located at CNSE??...

APCO Technologies is a Swiss company specialized in the design and manufacture of high quality equipment for the space and nuclear industry. Our mobil...

FEI is a worldwide company who designs and manufactures high performance microscopy workflows. FEI is re-using existing hoists of Cleanroom Cranes and...

Cymer, an ASML company, is the lithography light source market leader,supplier to various chip making companies. Together with our partner Zinter we a...

Interflow is a Dutch company specialized in air-handling and filtration of cleanrooms and surgical rooms and delivery of specialized flowbenches. Inte...

Together with our PP4C partners, Cleanroom Cranes will be present at the WOTS 2016 exhibition in the 'Jaarbeurs Utrecht' from October 4th-7th. We wi...

Micron Technology is a global leader in the semiconductor industry with manufacturing and sales located worldwide. For their production process in the...

Baxter has ordered nine explosion proof belt hoists WLL max 1000 kg. for their expansion of the factory in Covington. Zinter will take care of the ord...

Applied Materials is a global leader in supplying manufacturing equipment, services and automation software to the semiconductor industry. For their d...

Together with three other participants of the PP4C alliance (Brecon, Bolidt, Wero) we work on the construction of a new cleanroom environment for ATM ...

A new gantry crane weight load max. 600 kg including a CRH-1 hoist is ordered by Synthon in Nijmegen. Synthon is a pharmaceutical company who delivers...

As from October we will work with an extra distributor of Cleanroom Cranes by Mennens in Korea. Daekyung Co., Ltd. delivers Korean hoists since 1978. ...

ASML has ordered the first Virtual Reality training module. This VR application is linked to a real operating system and simulates working with a clea...

To improve the skills of crane specialists, we have developed a unique VR experience training module. By means of a VR application linked to a real op...

In the fourth quarter 2015, we will deliver a new EUV system at TSMC. The system will be used in the production environment. The set of cranes will in...

Mid August, we will deliver a new gantry crane to APCO technologies, Switzerland.The WLL is max. 3000 kg. It will be combined with a CRH belt hoist. A...

In the annual review of Axel Johnson, one of our customers, BKL, explains why the clean room cranes by Mennens and our way of working suit ideally in ...

CMI has recently joined PP4C, the strategic alliance between a number of professional companies in the (international) cleanroom market. CMI - Cleanro...